Enameling

Individual 2 oz. bottles can be ordered by product numbers listed with colors. Kit Instruction:A two-part, liquid system that produces a ceramic-like surface imitating kiln-fired enamels in appearance and physical properties. Low temperature curing -...

Individual 2 oz. bottles can be ordered by product numbers listed with colors. Kit Instruction:A two-part, liquid system that produces a ceramic-like surface imitating kiln-fired enamels in appearance and physical properties. Low temperature curing -...

Decorate this copper tray with enamels of all colors! Wet-pack enamel designs onto the copper, or you can raise the tray by hammering to create patterns. You can even engrave the tray and add enamel to your engraving. The copper is 18 gauge thick. Brand:...

Thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact...

Thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact...

Etchall® Etching Cream can be used to convert glossy vitreous surface into a mat surface. The surface can be kept as is for its textural appearance, or used as a substrate for easily drawing with ceramic pencils, crayons or lead pencils. Upon...

Rush fiberglass stick brush. Use on metal surfaces to burnish surface prior to enameling and after grinding to remove any grinding residue prior to re-firing work. Plastic covering can be cut down to expose brush as used.   Length: 5-1/2"...

Rush fiberglass stick brush. Use on metal surfaces to burnish surface prior to enameling and after grinding to remove any grinding residue prior to re-firing work. Plastic covering can be cut down to expose brush as used.   Length: 5-3/8" (13...

We found this is your ideal size for most common overglaze painting on enamel and ceramics. Contry of Origin: Made in Turkey

Hi-alumina Kiln Wash. Designed for glass and enamel kiln. Mix with hot water and brush on the kiln furnitures to protect surface from glass and glaze.

Powder product. You can mix with both oil and water medium. Oil medium recommended. Firing Temprature is cone 016-017.

Powder product. You can mix with both oil and water medium. Oil medium recommended. Firing Temprature is cone 016-017.