Soldering | Firing

Use this shelf kit designed specifically for the PMC user, by the PMC user. We heard that other shelf kits were too thick or to heavy and made this kit for you. The long-lasting Solderite pads transfer heat quickly so your pieces fire as they should; no...

This 14-karat yellow gold chip solder provides a good color match for lower karat gold; this easy formulation, with a low melting point, is best for the last join in a sequence. Already cut from sheet into conveniently sized 1 x 1mm pieces, this chip...

This 14-karat yellow gold chip solder provides a good color match for lower karat gold. Already cut from sheet into conveniently sized 1 x 1mm pieces, this chip solder is ready to use, saving the time and effort of cutting it as you go...

Use this product before primary flux for an oxide-free metal surface while soldering. It keeps metal parts clean to help solder flow freely, protects surfaces from firescale and is suitable for use with all non-ferrous metals. Excellent extended...

The most time tested anti-flux, used for generations to prevent solder from flowing onto unwanted areas. Simply mix with water or alcohol and brush onto areas you want to mask from the solder.

Automatic torch lighter allows you to light any torch using only one hand.

Ultra-refined butane fuel specifically geared for use with Micro Torch. Special, non-clogging formula allows extended use. Includes a single piece, universal tip. 5.5 oz. can.

The world's best charcoal will last three to five times as long. It also has better heat retention, giving the user the desired reflective heat to solder faster and easier with better flow. Our premium blocks are wrapped in PVC eliminating the mess often...

Use this activated carbon to embed metal clay pieces for firing. Coconut-shell–based carbon produces a light patina color on your pieces. To prepare the carbon for use, place it inside the container, cover with the lid and fire for 30 minutes at...

The metal parts on Thompson Enamel’s firing tools are made with mild steel. It is normal for this type of steel to oxidize slightly during the weld process and over time. If desired, you may remove oxidation with fine sand paper and a light coat of...

Our sturdy 16" flask tongs make retrieving hot flasks easy. Solid steel.

Stainless steel, heat and corrosion resistant. Mesh wire racks for transporting work in and out of the furnace. Suggested use in conjunction with Firing Rack Support Bars in the firing chamber and regular angle iron support bars on your table.