Enamel Supplies

The most versatile trivets for jewelry sized up to small panel sized pieces, including circles, ovals, squares, rectangles and irregular shaped pieces. Diameter: Approx. 2 3/4" Height: Approx. 2 1/4" **”Diameter” or “Fitting Area”...

The most versatile trivets for jewelry sized up to small panel sized pieces, including circles, ovals, squares, rectangles and irregular shaped pieces. Diameter: Approx. 3 1/4" Height: Approx. 3 1/18" **”Diameter” or “Fitting...

The most versatile trivets for jewelry sized up to small panel sized pieces, including circles, ovals, squares, rectangles and irregular shaped pieces. Diameter: Approx. 6" Height: Approx. 3" **”Diameter” or “Fitting Area”...

Metal type: Fine silver Karat/purity: 999 Hardness: Dead soft Gauge/thickness: 20 ga. Form: Wire Shape: Round Dimensions: .032" (0.80mm) Length per weight (approx.): 19.4 ft./ozt...

2 Pieces Set Funnels Use for filling Enamels, Ceramics Material, Tempera Pigments and other powder and fluid material. Dimension: Large, 10.8CM*7CM; Small, 9CM*6.5CM^

This simple round copper bead has a rich, earthy tone.please note: This copper component is raw and will patina naturally over time; to maintain the desired color, please lacquer raw copper components. Sold By EachShape: Round Dimensions: 16.0mm Hole...

Decorate this copper tray with enamels of all colors! Wet-pack enamel designs onto the copper, or you can raise the tray by hammering to create patterns. You can even engrave the tray and add enamel to your engraving. The copper is 18 gauge thick. Brand:...

Thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact...

Rush fiberglass stick brush. Use on metal surfaces to burnish surface prior to enameling and after grinding to remove any grinding residue prior to re-firing work. Plastic covering can be cut down to expose brush as used.   Length: 5-1/2"...

Rush fiberglass stick brush. Use on metal surfaces to burnish surface prior to enameling and after grinding to remove any grinding residue prior to re-firing work. Plastic covering can be cut down to expose brush as used.   Length: 5-3/8" (13...

We found this is your ideal size for most common overglaze painting on enamel and ceramics. Contry of Origin: Made in Turkey

Hi-alumina Kiln Wash. Designed for glass and enamel kiln. Mix with hot water and brush on the kiln furnitures to protect surface from glass and glaze.