Casting

This petite round black spinel is a budget-friendly alternative to black diamond and other more expensive black stones; the hardness makes it an appropriate choice for adding dramatic black stones to any type of jewelry, even those that get the most wear...

This petite round black spinel is a budget-friendly alternative to black diamond and other more expensive black stones; the hardness makes it an appropriate choice for adding dramatic black stones to any type of jewelry, even those that get the most wear...

A wax bracelet template to carve your own bracelet design for lost wax casting. Outer diameter: 63mm Inner diameter: 50mm Height: 48mm

The specially designed, angled shape of the this brass sprue former ensures full contact between the mold and wax injector nozzle for the best seal and wax fill. This set works with most wax injection nozzle shapes; creates a 1/8 sprue.  ...

Brand: Castaldo Material: Rubber Dimensions: 18"L x 18"W x 1/8"D Shrinkage: 3-4% Vulcanization temperature: 307°F (153°C) Form: Sheet Country of origin: United States  This...

Use this clay/silica crucible for torch-melt hand-pouring into ingot molds, tufa or cuttlefish bone, and for sand casting. Includes a handle for safer, easier pouring. Crucible is suitable for temperatures up to 2,500°F (1,370°C). ...

This blue Cowdery Profiles™ round wax rod is pre-milled to minimize carving time and give you a head start on manufacturing fine jewelry. This rod allows you to easily create a bezel; cut the wax to the length you need, then use a round bur to...

This blue Cowdery Profiles™ round wax rod is pre-milled to minimize carving time and give you a head start on manufacturing fine jewelry. This rod allows you to easily create a bezel; cut the wax to the length you need, then use a round bur to...

Inner Diameter: 12.7cm Inner Depth: 3.5cm Outside Depth: 5cm

Inner Diameter: 6.9cm Inner Depth: 2.5cm Outside Depth: 3.3cm

Inner Diameter: 9.2cm Inner Depth: 3cm Outside Depth: 4cm

For casting small objects. Press model directly between two pieces of cuttlefish. The soft shell makes a smooth walled mold. Sprues, gates and vents are cut into the wall with a sharp knife. The two halves are held together with binding wire and the...

This green wax is rigid, excellent for detailed carving or milling. Assortment includes thicknesses ranging from 4mm to 28mm **Material: Wax **Dimensions: 4MM 3pc; 5MM 5pc; 8MM 4pc; 18MM 3pc; 28MM 1pc; width:37MM; length:90MM **Melt temperature:...

Regarded by many wax designers as the best carving wax available anywhere, Matt™ waxes are formulated to the demanding specifications of professional wax carvers. Pre-milled and trued to minimize preparation time, each is specially formulated to...

5-3/4 x 3-1/2 x 1-3/8, 1 lb. bar. Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Available in...

This Ferris® Turquoise wax ring tube features a round profile and a centered hole to give you a head start in the carving work. The basic shape of a band is provided, meaning there is less time spent in removing unneeded material from the wax form...

Round Tube (T1062). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 1 " Diameter. 5/8" Diameter Eccentric...

This Ferris® Turquoise wax ring tube features a flat top and a centered hole to give you a head start in the carving work. The basic shape of a signet ring is provided, meaning there is less time spent in removing unneeded material from the wax form...

This Ferris® Turquoise wax ring tube features a flat top and a centered hole to give you a head start in the carving work. The basic shape of a signet ring is provided, meaning there is less time spent in removing unneeded material from the wax form...

This Ferris® Turquoise wax ring tube features a flat top and a centered hole to give you a head start in the carving work. The basic shape of a signet ring is provided, meaning there is less time spent in removing unneeded material from the wax...

This Ferris® Turquoise wax ring tube features a flat top and a centered hole to give you a head start in the carving work. The basic shape of a signet ring is provided, meaning there is less time spent in removing unneeded material from the wax...

Flat-Sided Tube (T250). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 1 1/8" Wide. 1 1/8" High. 5/8"...

Wax Tube with Flat-Top (T150). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work.  1" W x 1" H . 5/8"...

Flat-Sided Tube (T100). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 1" Wide. 1" High. 5/8" Diameter...

This Ferris® Turquoise wax ring tube features a round profile and an off-centered hole to give you a head start in the carving work. The basic shape of a band with room for carving a bezel is provided, meaning there is less time spent in removing...

Round Tube with Off-Centre Hole (T1062E). Pre-formed green wax ring tube. May be either hand or machined shaped with files, burs or on a lathe. Green wax is hard with no flexibility. Can be filed and machined. Good for fine detail work. 1 " Diameter...

Assortment of slices measuring 3-5/8 x 1-1/2 in varying thicknesses from 3/16 to 1. Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling...

Used to stir molten metal and to attract impurities leaving a clean melt. Diameter: 8mm. Length: 12" (30cm)

This wax block is ideal for hand carving and machining in CNC mills. Its hardness and higher melt temperature mean that this block is ideal for carving with high-speed equipment--machine it, shape it, slice it with great detail and accuracy. Each block...

A half-round wax bracelet template to carve your own bracelet design for lost wax casting. Outer diameter: 80mm Inner diameter: 44mm Length: 158mm

Injection wax for moldmaking in a blue colour. Comes in 450g bag. Also available in a green colour, but there is no difference between the two in terms of how they behave.   

Injection wax for moldmaking in a green colour. Comes in 450g bag. Also available in a blue colour, but there is no difference between the two in terms of how they behave.   

Formulation contains a de-foamer blended right into the material. Gives you low rise when vacuuming, a wider water usage range for greater yield and flexibility, easier removal of air bubbles on wax pattern surfaces and a more free-flowing mix. Molds...

Formulation contains a de-foamer blended right into the material. Gives you low rise when vacuuming, a wider water usage range for greater yield and flexibility, easier removal of air bubbles on wax pattern surfaces and a more free-flowing mix. Molds...

Grow, mold and begin shooting waxes the same day with this incredibly fast LiquaFast ICE molding compound from Castaldo®. This compound cures very rapidly at normal room temperatures and can be cured even faster if placed in a slightly warmer...

This Matt™ Green wax round rod is formulated to the demanding specifications of professional wax carvers; the rod is true, smooth and clean to produce the best results. This green wax rod fits into the Matt™ wax gun and is ideal for use in...

Regarded by many wax designers as the best carving wax available anywhere, Matt™ waxes are formulated to the demanding specifications of professional wax carvers. Pre-milled and trued to minimize preparation time, each is specially formulated to...

Regarded by many wax designers as the best carving wax available anywhere, Matt™ waxes are formulated to the demanding specifications of professional wax carvers. Pre-milled and trued to minimize preparation time, each is specially formulated to...

Brand: Matt™ Dimensions: 9"L x 21.0mm dia. Country of origin: United States Shipping weight: 0.209 lbs (95.010g)Quickly and accurately enlarge wax ring models! Slide a wax ring or ring tube onto this mandrel and gently rotate it against the...

Material Safty Data Sheet MSDS Matt’s flux begins fluxing at a lower temperature than borax, yet continues fluxing at a higher temperature than boric acid. It’s also pH-balanced at fluxing temperatures. This increases crucible life and helps...

Dimensions: 3"H (76mm) Size: 2-1/2" dia. (64mm) Country of origin: Taiwan Shipping weight: 8.396 ounces (238.028g) This solid, #304-quality stainless steel flask is a sturdy 14-ga. thick (2.0mm); it is...

Dimensions: 4"H (102mm) Size: 2-1/2" dia. (64mm) Country of origin: Taiwan This solid, #304-quality stainless steel flask is a sturdy 14-ga. thick (2.0mm); it is corrosion-resistant, durable for a long service life and...

Dimensions: 5"H (127mm) Size: 3-1/2" dia. (89mm) Country of origin: Taiwan Shipping weight: 1.226 lbs (557.330g) This solid, #304-quality stainless steel flask is a sturdy 14-ga. thick (2.0mm); it is...

Dimensions: 6"H (152mm) Size: 3-1/2" dia. (89mm) Country of origin: Taiwan Shipping weight: 25.557 ounces (724.535g)  This solid, #304-quality stainless steel flask is a sturdy 14-ga. thick (2.0mm); it is...

Brand: Ransom and Randolph Size: 50 lbs. (22.7kg) Country of origin: United States Shipping weight: 57.200 lbs (25.945kg)  Ideal for investing plastics and the resin models created in rapid prototype processes,...

Brand: Ransom and Randolph Size: 50 lbs. (22.7kg) Country of origin: United States Shipping weight: 57.200 lbs (25.945kg)  Ideal for investing plastics and the resin models created in rapid prototype processes,...

This strong rubber band is good for banding plaster mold. rubber mold. Widly use in slip casting, sculpture making. Perimeter: 13~56 cm (10-22) Thickness: 1.5 mm (0.06) Width: 0.4 cm (0.16) Color: Orange^

This strong rubber band is good for banding plaster mold. rubber mold. Widly use in slip casting, sculpture making. Perimeter: 19~70 cm (15-30) Thickness: 1.5 mm (0.06) Width: 0.9 cm (0.35) Color: Orange^

This strong rubber band is good for banding plaster mold. rubber mold. Widly use in slip casting, sculpture making. Perimeter: 30~80 cm (24-32) Thickness: 2 mm (0.06) Width: 2 cm (0.8) Color: Brown^

This strong rubber band is good for banding plaster mold. rubber mold. Widly use in slip casting, sculpture making. Perimeter: 56~160 cm (22-64) Thickness: 2 mm (0.04) Width: 2 cm (0.8) package Color: Brown^

This rubber sprue base is designed for tree spruing with multiple pieces on each tree. The round button holds the sprue. Diameter: 7cm / 2.5" Hole diameter: 8mm

This rubber sprue base is designed for tree spruing with multiple pieces on each tree. The round button holds the sprue. Outside diameter: 7cm / 3" Inside ring diameter: 6cm / 2.5" Hole diameter: 8mm

This rubber sprue base is designed for tree spruing with multiple pieces on each tree. The round button holds the sprue. Outside diameter: 9cm Inside ring diameter: 7.5cm Hole diameter: 9mm

This rubber sprue base is designed for tree spruing with multiple pieces on each tree. The round button holds a sprue.^d Outside diameter: 10cm Inside ring diameter: 8.7cm Hole diameter: 9mm Dia

This rubber sprue base is designed for tree spruing with multiple pieces on each tree. The round button holds a sprue.^d Outside diameter: 11.5cm Inside ring diameter: 10cm Hole diameter: 9.5mm Dia

A flask for sand casting, which is a process that uses sand as the material for the mold. Horizontal or vertical fill. Measures 4-3/4" H x 3" W x 2" D

A 5-lb can of ready-to-use sand for sand casting, which is a process that uses sand as the material for the mold. This casting sand is made of the best quality fine grain, contains moisturizing agents in the mixture, and is made "tough" to retain its...

A large solid carving wax cylinder. Measures 8cm in diameter and 11.5cm tall.

Solid wax rods for using as sprues or as design elements in lost wax casting. Comes in 13 different diameters: