Copper | Brass | Nickel Silver | Steel

Supplied in spools.  

Supplied in spools.  

**Metal type: Brass **Hardness: Half Hard**Form: Sheet **Dimensions: 300 x 300 x 1.2mm **Weight per length: 2.25 lb./sheet (approx.)^

**Metal type: Brass **Hardness: Half Hard**Form: Sheet **Dimensions: 300 x 300 x 1mm **Weight per length: 1.88 lb./sheet (approx.)^

**Metal type: Brass **Hardness: Half Hard**Form: Sheet **Dimensions: 300 x 300 x 0.8mm **Weight per length: 1.5 lb./sheet (approx.)^

Please note: Corners may be bent due to the softness of the metal. This dead-soft 18-gauge copper sheet offers the benefit of having larger sheets of this popular and affordable fabrication metal on hand when you need it; ideal for metal forming into...

Please note: Corners may be bent due to the softness of the metal. This dead-soft 20-gauge copper sheet offers the benefit of having larger sheets of this popular and affordable fabrication metal on hand when you need it; ideal for metal forming into...

CDA #110; 99.9% pure. **Melt temp.: 1981°F (1083°C) **Metal type: Copper **Hardness: Half Hard**Form: Sheet **Dimensions: 300 x 300 x 1.2mm **Weight per length: 2.25 lb./sheet (approx.)^

This 25.4mm, 18-gauge round copper disc is ideal for shaping into components for your designs. The disc is die struck with clean, crisp edges and will require some finishing to smooth its edges and polish its surface. Use dapping techniques to create...

This 38.1mm, 18-gauge round copper disc is ideal for shaping into components for your designs. The disc is die struck with clean, crisp edges and will require some finishing to smooth its edges and polish its surface. Use dapping techniques to create...

This 50.8mm, 18-gauge round copper disc is ideal for shaping into components for your designs. The disc is die struck with clean, crisp edges and will require some finishing to smooth its edges and polish its surface. Use dapping techniques to create...

This 63.5mm, 18-gauge round copper disc is ideal for shaping into components for your designs. The disc is die struck with clean, crisp edges and will require some finishing to smooth its edges and polish its surface. Use dapping techniques to create...