Enamel Supplies

The most versatile trivets for jewelry sized up to small panel sized pieces, including circles, ovals, squares, rectangles and irregular shaped pieces. Diameter: Approx. 3 1/4" Height: Approx. 3 1/18" **”Diameter” or “Fitting...

The most versatile trivets for jewelry sized up to small panel sized pieces, including circles, ovals, squares, rectangles and irregular shaped pieces. Diameter: Approx. 6" Height: Approx. 3" **”Diameter” or “Fitting Area”...

Metal type: Fine silver Karat/purity: 999 Hardness: Dead soft Gauge/thickness: 20 ga. Form: Wire Shape: Round Dimensions: .032" (0.80mm) Length per weight (approx.): 19.4 ft./ozt...

2 Pieces Set Funnels Use for filling Enamels, Ceramics Material, Tempera Pigments and other powder and fluid material. Dimension: Large, 10.8CM*7CM; Small, 9CM*6.5CM^

Thompson’s excellent inhibitor for the prevention of scale formation on exposed metal surfaces as enameled items are being fired. Paint it on thin and let it dry. Scalex falls off as fired items cool, exposing a clean metal surface. Sold in liquid...

Thompson’s excellent inhibitor for the prevention of scale formation on exposed metal surfaces as enameled items are being fired. Paint it on thin and let it dry. Scalex falls off as fired items cool, exposing a clean metal surface. Sold in liquid...

This product will not influence the firing result. Easer to transfer pattern to enamel surface for cloisonne design.How to use1. Draw or print pattern on paper2. Layering the transfer paper under the paper design3. Tape the paper on the fired enamel...

Use For Filing Enamel, Metal and Ceramic Large flat Surface **Demensions: 2 x 6 **Red:Rough **Yellow:Medium **Blue:Fine ^

This file set is for many different material, metal, enamel, glass and ceramics. Includes round, square, triangle, half-round and flat 5 different shapes Dementions: Length: 14 cm Width:  3~6 mm ^

Thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact...

Thin steel (0.015″; 28 gauge) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 gauge). Coat the back side with Scalex and fire flat on a wire mesh. Use standard contact...

Rush fiberglass stick brush. Use on metal surfaces to burnish surface prior to enameling and after grinding to remove any grinding residue prior to re-firing work. Plastic covering can be cut down to expose brush as used.   Length: 5-1/2"...